• ISSN 2320-6586 (Online)
  • Monthly since 2013
  • Open access
  • Double blind peer review
editor@ijrmeet.org

Modeling and Simulation of DC-DC Buck-Boost Converters

  • Shivani RaoIndependent Researcher, India

Keywords:

DC–DC buck–boost converter, modeling, simulation, MATLAB/Simulink, control strategies, efficiency;

Abstract

Modeling and simulation of DC–DC buck–boost converters are critical for predicting performance characteristics and optimizing design parameters in power electronics applications. This manuscript presents an analytical model based on averaged switch equations, incorporates nonidealities such as MOSFET on-resistance and inductor core losses, and validates the model through time-domain simulations in MATLAB/Simulink R2018a. Key performance metrics including voltage regulation, efficiency, and transient response are evaluated under varying load and input voltage conditions. A statistical analysis summarizing simulation data is provided in a single table. Simulation research examines the impact of control strategies—voltage-mode versus current-mode control—on converter stability and dynamic performance. Results demonstrate that current-mode control yields a 15 % faster settling time and 3 % higher efficiency compared to voltage-mode control under identical conditions. Five research objectives guide the study, focusing on model accuracy, loss characterization, control comparison, and design optimization. The manuscript concludes with recommendations for design improvements and suggestions for future work on digital control implementation.

REFERENCES
[1] R. D. Middlebrook and S. Cuk, “A general unified approach to modeling switching-converter power stages,” in IEEE Power Electronics Specialists Conference, 1977, pp. 18–34.
[2] D. C. Erickson and D. Maksimović, Fundamentals of Power Electronics, 2nd ed. Norwell, MA: Kluwer, 2001.
[3] Y. S. Lee, J. H. Kwon, and S. H. Kang, “Loss estimation of DC–DC converters using analytical switching loss model,” IEEE Trans. Power Electron., vol. 28, no. 1, pp. 237–247, Jan. 2013.
[4] J. Wang and L. Zhang, “Current-mode control analysis and design for buck–boost converters,” IET Power Electron., vol. 8, no. 5, pp. 871–879, May 2015.
[5] S. Padhan and M. Mishra, “Comparative study of voltage mode and current mode controlled buck–boost converter,” Int. J. Power Electron., vol. 7, no. 4, pp. 335–348, 2016.
[6] A. Kumar, P. Singh, and R. K. Gupta, “Digital control of bi-directional DC-DC converters using FPGA,” in IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), 2017, pp. 1–6.
[7] M. Rashid, Power Electronics: Circuits, Devices and Applications, 4th ed. Pearson, 2014.
[8] F. Blaabjerg, Z. Chen, and S. B. Kjaer, “Power electronics as efficient interface in dispersed power generation systems,” IEEE Trans. Power Electron., vol. 19, no. 5, pp. 1184–1194, Sep. 2004.
[9] P. T. Krein, Elements of Power Electronics, Oxford Univ. Press, 1998.
[10] M. H. Rashid, “Modeling and simulation of switching-mode power converters,” IEEE Trans. Aerosp. Electron. Syst., vol. 32, no. 3, pp. 811–821, Jul. 1996.

How to cite

Shivani Rao (2018). Modeling and Simulation of DC-DC Buck-Boost Converters. International Journal of Research in Modern Engineering & Emerging Technology, 6(10), 11-15.

Licence

This article is open access, published under the CC BY 4.0 licence. Copyright remains with the authors.

If the issue persists, you can use the old publisher details where you get it published.